Finally, Some Real Progress After a Dry Spell

I got some shoulder and leg work done over the holiday. I got the shoulders pretty much done. They have been skinned in the .040" styrene with an outer layer of 1/16” thick aluminum held in place mostly by 3M VHB tape and a little glue at the ends where the seam is. You can just see the finished shoulders behind the legs in the lower pictures of the legs.

The legs are all assembled and drilled, but I need to fill in some areas and even some others out with a little filing and sanding before skinning. While I do that I have started assembling the main ankles (not pictured.)

One thing I have noticed is that the bolts that stick up into the leg where the shoulder hub will go seem way too long. I am wondering if they need to be cut down to accommodate the shoulder bolt. I need to pick up a set of resin shoulder hubs to confirm the lengths for cut-off.